Subject: Re: Possible solution for paper curling - KIP service bulletin
From: "Michael B" <[email-masked]>
To: "David Ostrovetz" <[email-masked]>
Cc: "Ryan Coleman" <[email-masked]>, "Jeff Lorencen" <[email-masked]>
Date: Wed, 9 Oct 2013 11:12:59 -0400

Hello Dave.
We are going to need the GBC service man come out and adjust tension on the blade on the cutter.  I would called him myself but do not have the number to service to do so.   The cutter is pulling the blade across but not pressing down on the wheel that pushes the blade through.  It is just kind of dragging the blade across it.  It would be good if we could get him over asap.  Let me know asap.
Thank you,
Michael B
LLPS

From: David Ostrovetz 
Sent: Tuesday, October 08, 2013 9:20 AM
To: Joey Sheets ; Michael B 
Cc: Jeffery Lorencen ; Howard Deeter ; Pat Samsel ; Ryan Coleman 
Subject: Possible solution for paper curling - KIP service bulletin

Hi Joey & Mike,

Pat found this service bulletin showing a "Fix" for the paper curling on the output of the KIP, which we have established is an issue with this solution.

Pat has ordered the parts to swap out with the KIP and we will hopefully have them by Tomorrow (Wednesday) along with the paper (32 lb) to test.

If anything changes in this timeline I will let you know.
Thanks,

Dave O

---------- Forwarded message ----------
From: <[email-masked]>
Date: 2013/10/8
Subject: Message from KMBT_C754
To: [email-masked]

-- 

Dave Ostrovetz
Branch Sales Manager Lansing / Saginaw
Konica Minolta

[email-masked]

248.383.3833 Voice / Txt